| Item Name |
Model |
| Revision kits |
|
OMS310342 |
 Excluding carburator Contains the following parts: OMS310020 O-ring seal 12x2 oil-plug OMS310090 O-ring seal exhaust OMS310160 Rotary shaft seal 18x32x4,7 OMS310330 Rotary shaft seal 12x32x7 OMS320040 Axle shaft seal 20x28x4 in hub sleeve OMS320150 Rotary shaft seal 45x52x5 OMS320250 O-ring seal 13,87x3,53 OMS350020 Seal reed valve plate OMS350130 Seal ring deco. valve OMS310360 Cilinderhead gasket |
|
OMS340270 |
 This set contains the following parts: OMS350020 Seal reed valve plate OMS340030 O-ring seal 16x3 (reed valve side) OMS340160 Carburator gasket seal (top cover) OMS340170 O-ring seal TK without filter OMS340180 O-ring seal TK with filter OMS340230 Float bowl gasket rubber |
|
OMS342220 |
 This set contains the following parts: OMS350020 Seal reed valve plate OMS340030 O-ring seal 16x3 (reed valve side) OMS342110 Carburator gasket seal (top cover) OMS342080 O-ring seal in top cover OMS342170 Float bowl gasket |
| Crankcase |
|
OMS310020 |
 Fits all engines. Sachs number: S00 1736 314 000 |
|
OMS310030 |
 Sachs number: S00 2940 013 000 Fits all engine types (Spartamet and Saxonette). |
|
OMS310040 |
 Sachs number: S00 2940 002 002 Fits all engine types (Spartamet and Saxonette). |
|
OMS310050 |
 Sachs number: S00 0240 187 002 Fits all engine types (Spartamet and Saxonette). |
|
OMS310060 |
 O-Ring OMS310090 Included. For easyer mounting fill the gap for the O-ring seal with vaseline and after that place the O-ring in the gap. |
Sachs number: S00 2640 027 102 For all Spartamet and Saxonette engines. M6 x 16 for exhaust
Sachs number: S00 2950 003 200 For all Spartamet and Saxonette engines with original or Proma exhaust.
Sachs number: S00 2960 001 100 For all Spartamet and Saxonette models.
Sachs number: P73 200 968 45 42 000 For Spartamet and Saxonette
Sachs number: S00 2932 007 000 For Spartamet and Saxonette For Clutch Basket Axle 25km
Sachs number: S00 2930 001 000 For Spartamet and Saxonette Clutch Side R.
1x needed per bearing. Sachs number: S00 0244 173 000
Won't fit in the older engines with a 2-stage transmission.(099, 199) Use SAX310320 for this engine. Sachs number: S00 2932 015 101
In cranckshaft. Sachs number: S00 2932 009 000
Sachs number: S00 2939 003 100
Sachs number: S00 2958 005 100
Sachs number: S002984001201 / S002984001201B
Hudson nr.: 13103S1500 Sachs number: S00 2915 001 100
Sachs number: S00 2916 001 000
2x needed per piston. Sachs number: S00 2945 001 000
Sachs number: S00 2932 003 000
All engine types. Sachs number: S00 2988 003 003
Sachs number: S00 2846 001 000
Mounts Against Crankshaft. Sachs number: S00 0244 102 001
6201 N TN9 C 4 (Crank Side) In case of a 2-stage transmission this bearing is also used on the right side (clutch) instead of bearing OMS310180 Sachs number: S00 2932 004 001
On left side of crank. Sachs number: S00 2930 002 000
J-II-E Sachs number: P005294001201000
Sachs number: P00 529 020 50 01 000
Sachs number: P00529 409 41 02 000
With washer (M6 X 45) Sachs number: P00529 991 02 01 000
With washer (M6 X 35) Sachs number: P00529 991 02 02 000
Imitation Incl. Compression ring, piston pin and retaining clips. Spartamet and Saxonette Diameter 32.94mm.
Saxonette. Sachs number: P00 900 030 04 03 000
Rear axle Saxonette/Spartamet. Sachs number: S00 1730 113 004
Rear axle Saxonette/Spartamet. Sachs number: P70 927 991 58 31 000
Sachs number: S00 2932 002 000
In hubsleeve. Sachs number: S002930003000
(DS38) in Hub Sleeve Sachs number: S00 0576 102 000
Saxonette/Spartamet rear. Sachs number: S00 0873 207 110
Sachs number: S00 2984 003 000
Sachs number: S00 2944 003 000
Sachs number: S00 2949 003 100
Sachs number: S00 2923 001 100
Sachs number: S00 2945 003 000
A piece (4 times required per wheel) Sachs number: S00 0248 142 000
On Hub Sleeve. Sachs number: S002930004000
On Hub Sleeve. Sachs number: S00 2932 011 000
Sachs number: S00 2932 010 000
Sachs number: S00 2937 002 100
On rear axle (2x needed). Sachs number: S00 2932 016 000
Sachs number: S00 0244 171 003
Sachs number: S00 1710 499 000
Sachs number: S00 2932 001 000
On rear axle left. Sachs number: S00 2950 007 000
Sachs number: S00 2944 005 000
Saxonette Luxus / Companion. C128 031
Spartamet MO18.
Saxonette/Spartamet rear
For all models Spartamet and Saxonette with recoil starter.
Fixation of the ignition-coil.
Sachs number: S00 2665 029 000
Sachs number: S00 2965 001 200
Sachs number: S00 2944 018 000
Sachs number: S00 2942 001 000
Sachs number: S00 2970 002 000
Sachs number: S00 2945 002 000
Sachs number: S00 2970 001 300 With coil spring and perlon cord. Diameter 82,4 mm. Can only be used with the current model pawl with spring. The older model pawl with pin on the bottomside does not fit.
In recoil cover (3x) in e-start cover (2x). Sachs number: S00 2940 003 001
In recoil cover (3x) in e-start cover (2x). Sachs number: S00 2949 006 000
Sachs number: S00 2640 016 002
Sachs number: S00 2949 001 000
Sachs number: S00 2952 003 001 For E-start when shortened to 1050mm.
Extra thin. (3mm) For E-start when shortened to 1050mm.
Sachs number: S00 2670 062 000
Sachs number: S0029655007100 With flat rotary connector for the charging coil. The round rubber connector is no longer available and the battery box must be converted with the new connector or the connector from the old coil (wire) must be transferred to the new coil.
Sachs number: S00 2965 001 201
Sachs number: S00 2940 020 000
Sachs number: S00 2911 004 000
Sachs number: S00 2949 008 000
Sachs number: S00 2940 019 000
Sachs number: S00 0245 101 000
Sachs number: S00 2944 015 000
Sachs number: S00 2932 026 000
Sachs number: S00 2939 012 000
Sachs number: S00 2944 017 000
Including 1x sleeve 7,8mm. (OMS332150) and 2x sleeve 28mm.(OMS330160) As long as stock exists. Sachs number: S00 2911 003 000
Sachs number: S00 2952 009 000
Sachs number: S00 2911 005 000
Contra plug to to convert the battery box to the new connector from the ignition coil.
1x female housing + 2x terminal female For accu 2 pole.
1x male housing + 2x terminal male For old accubox or charger 2 pole.
1x female housing + 3x terminal female To rebuild an old accu from 2 pole to 3 pole connector.
1x male housing + 3x terminal male To rebuild an old accubox or charger from 2 pole to 3 pole connector.
1x male housing + 2x terminal male 1x female housing + 2x terminal female
1x male housing + 3x terminal male 1x female housing + 3x terminal female To rebuild an old accubox or charger from 2 pole to 3 pole connector.
2 pieces in blister.
Sachs number: S00 2950 008 000
Sachs number: S00 2950 011 000
Sachs number: S00 2950 010 000
Sachs number: S00 2950 010 100
Sachs number: S00 2950 009 000
Sachs number: S00 0941 039 004 Mounting bolt for Bing and TK.
Sachs number: S00 2939 007 000
Sachs number: S00 2963 001 100 For BING and TK.
Sachs number: S00 2981 001 000 Wordt op verzoek bij Bing gebouwd. Als alle onderdelen op voorraad zijn moet U op een minimale levertijd va 3 a 4 weken rekenen.
Sachs number: S00 2981 003 000
Sachs number: S00 2981 002 202 
Sachs number: S00 2981 003 001
Sachs number: S00 2940 009 000 Short bolt in the cover plate. 2x used in top cover.
Sachs number: S00 2940 010 000
Sachs number: S00 2950 006 000
Sachs number: S00 2961 006 000
Sachs number: S00 2950 005 000
Sachs number: S00 2939 006 000
Sachs number: S00 2981 004 000
Sachs number: S00 2940 011 000
Sachs number: S00 2961 008 000
Sachs number: S00 2950 004 000
Sachs number: S00 2961 002 000 !!! Waarschuwing !!! Bing heeft dit onderdeel jaren geleden gemodificeerd en er zit nu geen gaatje voor de vlotternaald meer onder in het bakje. Dit is omdat de nieuwe vlotters een kortere naald hebben. Het oude type vlotter is samen met deze vlotterbak te gebruiken maar dan moet de naald aan de onderkant minimaal 10mm. ingekort worden.
Sachs number: S00 0240 199 000
Sachs number: S00 2961 010 000 Only for the BING carburettor.
Sachs number: S00 2981 005 000
Sachs number: S00 2950 002 100 For all Spartamet and Saxonette models.
Sachs number: S00 0240 076 001
Sachs number: S00 2944 009 000
Sachs number: S00 2940 012 002
Sachs number: S00 0941 078 002
Sachs number: S00 2960 003 000
Sachs number: P00 529 463 01 01 000 For all Spartamet and Saxonette models.
Sachs number: S00 2940 006 002
Sachs number: S00 2991 009 000
Sachs number: S00 2940 017 002 
Sachs number: S00 0230 015 000
Sachs number: P00 927 180 03 68 000 Saxonette/Spartamet/Companion mounted on fuel tank
Sachs number: P00 927 183 18 05 000
Reflektor voor montage op het spatbord. Beugel is te verwijderen waarna de reflektor met dubbelzijdige tape op de tank is te monteren.
Sachs number: P00 927 993 31 46 000 Sax. Luxus/Spartamet
For all models Spartamet, Saxonette Luxus and Rabbit. Not for Saxonette Classic or Tandem.
For all models Spartamet, Saxonette Luxus and Rabbit. Not for Saxonette Classic or Tandem.
For all models Spartamet, Saxonette Luxus and Rabbit. Not for Saxonette Classic or Tandem.
For all models Spartamet, Saxonette Luxus and Rabbit.(Incl. Tandem) Not for Saxonette Classic.
Complete Spartamet/Saxonette/Companion
fits left and right
Complete Saxonette/Spartamet/Companion
Sachs number: P00 927 156 87 18 000
Sachs number: P00 927 156 87 18 000
Sachs number: P70 927 991 58 30 000
Spartamet front and rear Schwalbe 12AV 26x1 3/8 (37-590, 40-590, 42-590, 44-590)
Schwalbe 13AV (50-559) 26x1.9 Only used on Saxonette Classic
Axa Defender
Only in combination with Axa Defender, Solid Plus or Fusion.
Axa Defender
Axa Defender
Balhoofdstel1 inch
Hessling smoke.
Sachs number: P985191005502000 Thoes not fit on the saxonette classic.
Voor het nieuwe model midden standaard.
Sachs number: P00 927 993 31 48 000
Sachs number: P00 927 770 10 28 006
Temperature resistant from -40 to +180 Celcius.
Blikje met 65 gram vet.
Potje met 50 gram vet.
Spray can, 400ml.
TTX synthetic
0,05 - 1,0 mm.
0,05 - 1,0 mm.
With the rabid screws removerset are bolts with damaged heads easy to remove
With the lefthand tapping set are bolts with damaged heads easy to remove
Special tool for the lower retaining clip on the chokeslider of the BING carburettor. (Knipex nr. 4921A01)
V-Coil thread repair kit from Völkel M10 x 1. Contents of this kit: 1x Storage case 1x Manual 1x Drill 1x Tap 1x Insertion tool 1x Finalizing tool 15x Thread insert 10mm. long (Thread of decompesseion valve) 
V-Coil thread repair kit from Völkel M14 x 1,25. Contents of this kit: 1x Storage case 1x Manual 1x Combined Drill / Tap 1x Insertion tool 1x Finalizing tool 10x Thread insert 14mm. long For sparkplug thread repair there is no need to drill first. The special drill/tap does this in one run. This kit does not include a drill. 
V-Coil thread repair kit from Völkel M4 x 0,7. Contents of this kit: 1x Storage case 1x Manual 1x Drill 1x Tap 1x Insertion tool 1x Finalizing tool 20x Thread insert 4mm. long
V-Coil thread repair kit from Völkel M5 x 0,8. Contents of this kit: 1x Storage case 1x Manual 1x Drill 1x Tap 1x Insertion tool 1x Finalizing tool 20x Thread insert 5mm. long
V-Coil thread repair kit from Völkel M6 x 1. Contents of this kit: 1x Storage case 1x Manual 1x Drill 1x Tap 1x Insertion tool 1x Finalizing tool 20x Thread insert 6mm. long
Double bicycle bag of 600D water resistant polyester Pre-formed and reinforced. Provided with double safety reflection at back- and frontside. Topside with two connection-bands suitable for LED/luggage carrier straps/child's seat/tank cap. Cover provided with 'Soft filling'. Optimum freedom for heels through rounded sides so they will not touch the bag. Capacity 40 liter. (2 x 20)
